Tile. Sheet. Wall base. Stair treads. Optimum performance starts with quality installation, and FLEXCO® Adhesives position you to get expected results time after time. Epoxy adhesives. Caulking compounds and color-matched caulks. FLEXCO Adhesives are the perfect match for our products and your production schedule. Plus, all adhesives have low or no VOC’s to help contribute to your LEED projects.
spray-gripTM adhesive for rubber tile
FLEXCO® spray-gripTM adhesive for rubber tile – low VOC, low odor, sprayable adhesive – uses 80% less adhesive on jobs, and allows immediate foot traffic after rolling. Water-based with up to 150 s/f coverage per can. FloorScore® approved. For use with rubber tile and sheet, Tuflex® ForceTM and Prime SportsTM Flooring.
spray-gripTM adhesive for vinyl tile
FLEXCO® spray-gripTM adhesive for vinyl tile – low VOC, low odor, sprayable adhesive – uses 80% less adhesive on jobs, and allows immediate foot traffic after rolling. Water-based with up to 190 s/f coverage per can. FloorScore® approved. For use with Natural Elements Vinyl Plank and Stone, and Health Design, Appeal and Contract Vinyl Tile.
16/86 multi-performance tile & tread adhesive
Recommended for the installation of rubber or vinyl tile, sheet, stair treads, risers and stringers on clean, permanently sound, suspended wood and concrete floors on or above grade Contains an antimicrobial for added protection against mold and bacteria. Spread: Approx. 150 sq. ft. per gallon with a 1/16" x 1/16" x 1/16" flat V trowel
36 epoxy caulking compound
Two-component chemical-set adhesive used for repairing worn stair under steps, 1/2" bead at nosing to ensure 100% backing for nosing. Spread: Approx. 1/4" bead, 470 lin. ft. per gallon
66/67 solvent-free epoxy adhesive
Two-component chemical-set adhesive for installation of conductive and static dissipative tile only. Spread: Approx. 175 sq. ft. per gallon with a 1/32" x 1/16" x 1/32" trowel
77 solvent-free epoxy adhesive
Two-part recommended for the installation of rubber and vinyl resilient flooring on porous and nonporous substrates on grade, above grade or below grade, and in areas where flooring is subjected to lateral sheer stresses. Spread: Approx. 175 sq. ft. per gallon with a 1/32" x 1/16" x 1/32" trowel
106 wall base adhesive
Water-soluble fortified polymer emulsion for installation of rubber and vinyl wall base. Contains an antimicrobial for added protection against mold and bacteria. Also available in 30-ounce cartridges. Spread: Approx. 250 lin. ft. per gallon
flextape
Solvent-free double-coated high-tack modified polyacrylate adhesive strips with polyester thread for rubber and vinyl stair treads, risers and stringers. Coverage: 9.45" x 164' roll and 1" x 164' roll cover 164 lin. ft.
flextuft® adhesive
Solvent-free waterproof adhesive for use with FlexTuft® rubber tile. Spread: Approx. 75 sq. ft. per gallon with a 1/8" x 1/8" x 1/8" trowel
220 sports floor adhesive
One part solvent free moisture-cure polyurethane adhesive recommended for both indoor and outdoor installations of Prime sports flooring and Tuflex Force sports flooring. Spread: Approx. 90-100 sq. ft. per gallon with a 1/16" x 1/16" x 1/16" square notched trowel on a smooth substrate.
